Most rust converters that are available today are both a water-based primer and converter. Two active ingredients are found in most rust converter products: Tannic acid (iron oxide) and an organic polymer. Tannic acid, reacts with iron oxide (rust) and chemically converts it to iron tannate, a dark-colored stable material 🔥 Tannins are a group of water- and alcohol-soluble natural products extracted from fruits, trees and grasses 🙈 The tannings on new timber will begin to bleed within a few months 🙌 A second active ingredient is 2-Butoxyethanol. This organic polymer dries to form a protective primer. This chemical reaction turns the rust into an organic polymer. Black protective polymeric coating that is now stable and creates serves an excellent primer for both oil Epoxy-based paints. 
How can I prepare my surface for the application? A good surface preparation is essential for Rust Converter’s effectiveness and will result in a superior product. Large rust particles and scale can be removed with a stiff bristled brush or sandpaper. This step will remove any flaking or loose rust from the surface. Rust Converter chemically bonds with the rust to make it more durable. Rust converter cannot penetrate oil or grease so first clean the surface and then dry it. This ensures other contaminants do not hinder the reaction of the Rust Converter on the rusted surfaces. If you have any questions, please let us know. Surface is subject to salt water Spray for the deicing salts and rinse thoroughly with water. Let it dry before applying Rust Converter. 
A Rust Converter, a synthetic polymeric formulation that transforms metal rust into a protective and water-free black layer. It converts and kills existing rust. Additionally, it seals off water to stop future rust from forming and further degrading underlining metal. This premium process protects metal surfaces from weathering and rain. It also seals out water to prevent future rust formation. The rust converter must be maintained according to the manufacturer’s instructions. Rust Converter works well as a primer for both oil-based and epoxy paints. You can apply rust converter quickly and easily to prevent permanent rust on steel or iron surfaces. 
Santa Ruffin: fuze-products.co.ukApplying rust convertors is easy with a brush. Apply it with a brush. Paint to a wall. There is a solution non toxic This allows it to be applied on almost any surface with rust. A roller can be used to cover larger areas. You don’t need to thin the solution. The solution should be used exactly as it is. A rust converter is a chemical that reacts with rust, resulting in a darkened compound which can stain wood and leather. To minimize dark stains, be aware of other porous materials and avoid contact. This article was revised by Tonesha Merrill, August 9, 2020. 
Rust Converter, a synthetic polymeric formulation that transforms existing rust to a protective black coating without moisture. This coating seals away moisture, which prevents future corrosion and rust from forming. The oil-based primer combined with an oil-based oil paint will resist weather changes, sun, rain, and salt spray. They have won’t crack or peel if the paint is kept in accordance to the manufacturer’s instructions. Rust Converter is a great primer for epoxy and oil-base paints. This product can be used to protect steel and iron surfaces for a long time. This page was last modified on 8/02/2018 by Daina Duke from San Diego (USA).