[SOLVED] How Do You Change A Fuel Filter On A Vw Polo?

Original fuel filter Polo Sedan comes with an article VAG 6Q0201051J. Average cost spare parts: 1200 rubles. The fuel module is found in the tank. It can be installed separate from it. Drivers are sometimes confused and install the VAG 1K0201051K filter instead. This isn’t the right one for the Polo Sedan. Both parts look almost identical from the outside. Only the pressure regulator is different. This indicator is in the original 6Q0201051J and has 4 bars. For non-vehicle installations filter VAG 1K0201051K(with a regulator valve pressure A clearly audible sound is heard from the fuel pump at 6.4 bars [2]

At korea1.ru Send us more information. Original fuel filter Polo Sedan’s article is VAG 6Q0201051J. Spare parts average price – 1200 rubles. The fuel module is found in the tank. It can be installed separate from it. Experience has shown that drivers often get confused. They install the filter with the VAG 1K0201051K number, which was not made for Polo Sedan. Both parts look almost identical from the outside. Only the pressure regulator is different. In the original 6Q0201051J, this indicator is four bars. There is clearly audible sound from the fuel pump when installing a VAG 1K0201051K non-vehicle filter (with regulator valve pressure of 6.4 bar). Jeneva Elder of Shijiazhuang in China brought this to our attention. [3]

Original fuel filter Polo Sedan comes with an article VAG 6Q0201051J. Average cost spare parts: 1200 rubles. The fuel module is found in the tank. It can be installed separate from it. Experience has shown that drivers often get confused. They install the filter with the VAG 1K0201051K number, which was not made for Polo Sedan. Both parts look almost identical from the outside. Only the pressure regulator is different. In the original 6Q0201051J, this indicator is four bars. There is clearly audible sound from the fuel pump when a VAG 1K0201051K non-vehicle filter (with regulator valve pressure of 6.4 bar) has been installed. [4]

The experts at uk-polos.netRemove the sump plug at bottom of engine. Drain out any oil and replace it with a brand new one. Take off the sump plug. Oil filter from engineAllow any remaining oil to drain, then clean the block using a clean cloth or similar. Finally, apply new oil to the oil filter gasket. Once the oil has dried, tighten the screw HAND-TIGHT. You can tighten the oil system further because it is under pressure. The dipstick and the filler cap should be removed. Add 3.5 Liters of oil to the engine. After letting the engine run for about a minute, check the oil level and refill to the tank. Now you’re done. The following was edited and written by Amanda Jimenez (Tanta, Egypt October 20, 2021). [5]