in , , , , ,

How Do You Clean Terrazzo Tile? [9 Answers Found]

Originally, Terrazzo was poured on site, using waste natural stone chips and pieces, mixed with cement 😊 Its still possible to have a poured Terrazzo floor, but cost and the scarcity of experienced practitioners can make is prohibitive 😊 In tile form, the terrazzo first made its appearance as a dual layered material, combining a surface layer of the stone-cement mix and a base layer of purer cement πŸ”₯ Its strength made the tile suitable for use on airport platforms, railway platforms, and supermarkets. But, because of its weight, it proved difficult to install in residential areas. [1]
Although the terrazzo floor is durable due to the use of marble chips, the binder can stain easily, making it more susceptible to stains. Although cement is the hardest porous material, terrazzo floors can be sealed with a sealer to protect them from liquid and staining. The sealer is applied as a preventative measure that will keep your floors looking great. But, it must be removed periodically and reapplied to ensure the floor looks new. You should never use wax. Coat a terrazzo floor because it can lead to dangerously slippery floors. Also, waxy buildup could cause the floor’s shine to become duller. Many thanks to Eryca from Hyderabad, India who shared this information with us. [2]
Image #2
The experts at find that Terrazzo can be polished once it is polished. However, like any polished surface, Terrazzo needs to be repolished at some point. You will need to use a buffing machine that can run at 150 rpm or slightly more and set of Tile Doctor burnishing pads. These pads will help restore the polished finish by being applied sequentially. You will need to start the burnishing by using a rough No.1 Red burishing pads to clean off any sealer or dirt. After adding water, you can then apply water to each tile, and continue the process with a few more times. Vacuum and rinse the floor. Then remove the coarse pad, apply the No2 Blue burnishing pads and continue the procedure with the No.3 yellow burnishing pads. The water can be removed with a dry Vax machine. Next, scrub grout joints using Pro-Clean dilute 1:5 water. Let dry thoroughly before you apply a No. Use a No. 4 green burnishing pad to polish the floor. Apply a sealer to protect your floor after it has been polished. [3]